Section 23: ACCESSORIES
PA1562
7
Place the ignition switch in the ‘’OFF’’
position.
Remove the dashboard cover.
Disconnect the electrical connectors
from unit and unfasten back plate
securing nut/screw.
To separate the Sound Selector from its
support, insert the removal tool
#20584494 in the holes found each side
of the unit front panel.
Push the unit through the front
dashboard panel.
Install a new unit by reversing the
procedure.
The operating instructions are included in your
Operator’s Manual.
1.3 VD-404 MOBILE DVD PLAYER
FIGURE 7: VD-404 MOBILE DVD PLAYER
The MOBILE DVD PLAYER is located in the first
parcel compartment on the driver’s side.
Instructions for proper use of this unit are
included at the end of this section.
Features:
• POWER
Operating voltage: 12-volt DC
• COMPATIBILITY
This DVD player can play the following disc
formats:
DVD, CD, VCD, DVCD, MP3, CD-R, CD-RW
• SYSTEM FUNCTIONS
Video output system: system MULTI, NTSC
or PAL switchable.
1 L/R audio output
1 L/R audio input
1 AUX video output
1 rear camera video input
3 video outputs with one dedicated self
switching rear view monitor
• ADDITIONAL VIDEO FEATURES
Multi-angle, multi-view, multi-audio function,
multi-level forward and backward motion, play
position memory, resume stop and repeat
function.
1.4 MULTICHANNEL POWER AMPLIFIER
VA400.8
This 400-watt, 6-channels brings an added
dimension to your stereo equipment and
increases the total output of the system.
FIGURE 8: MULTICHANNEL POWER AMPLIFIER
For optimum sound quality, adjust the
subwoofer crossover filter as shown on figure
10. This adjustment is necessary to balance the
subwoofers volume in respect to the other
speakers and also to cut high frequencies for a
better sound quality.
FIGURE 9: CROSSOVER ADJUSTMENT
To Next Page
Loading...
