4
main local global operation trouble-
menu search search shooting
BUTTON ROLL
PIN
PANEL
MOUNTING
NUT
7
4
5
6
3
6. Never connect or disconnect a hose or line con-
taining pressure; it may whip. Never remove a
component or plug unless you are certain all sys-
tem pressure has been depleted.
7. Never exceed recommended pressures and always
wear safety glasses.
8. Do not attempt to install, remove, disassemble or
assemble a component until you have read and
thoroughly understand the recommended proce-
dures. Use only the proper tools and observe all
precautions pertaining to use of those tools.
9. Use only genuine Bendix replacement parts, com-
ponents, and kits. Replacement hardware, tubing,
hose, fittings, etc. should be of equivalent size, type,
and strength as original equipment and be designed
specifically for such applications and systems.
10. Components with stripped threads or damaged
parts should be replaced rather than repaired. Re-
pairs requiring machining or welding should not
be attempted unless specifically approved and
stated by the vehicle or component manufacturer.
11. Prior to returning the vehicle to service, make cer-
tain all components and systems are restored to
their proper operating condition.
RD-3
FIGURE 6
8
9
BW1578 © AlliedSignal Truck Brake Systems Co. 1/1999. Printed in USA.
To Next Page
Loading...
