Service Notes
Information contained in this publication was in effect at the time the publication
was approved for printing and is subject to change without notice or liability.
Meritor WABCO reserves the right to revise the information presented or to
discontinue the production of parts described at any time.
Meritor WABCO Maintenance Manual MM-0112 (Revised 07-05)
About This Manual
This manual contains maintenance procedures for Meritor WABCO’s
Anti-Lock Braking System (ABS) for trucks, tractors and buses.
Before You Begin
1. Read and understand all instructions and procedures before
you begin to service components.
2. Read and observe all Warning and Caution hazard alert
messages in this publication. They provide information that can
help prevent serious personal injury, damage to components,
or both.
3. Follow your company’s maintenance and service, installation
and diagnostics guidelines.
4. Use special tools when required to help avoid serious personal
injury and damage to components.
Hazard Alert Messages and Torque
Symbols
WARNING
A Warning alerts you to an instruction or procedure that you
must follow exactly to avoid serious personal injury and
damage to components.
CAUTION
A Caution alerts you to an instruction or procedure that you
must follow exactly to avoid damage to components.
@ This symbol alerts you to tighten fasteners to a specified torque
value.
How to Obtain Additional Maintenance
and Service Information
On the Web
Visit the meritorwabco.com website to easily access product and
service information. The website also offers an interactive and
printable Literature Order Form.
ArvinMeritor’s Customer Service Center
Call ArvinMeritor’s Customer Service Center at 800-535-5560.
Technical Electronic Library on CD
The DriveTrain Plus™ by ArvinMeritor Technical Electronic Library
on CD contains product and service information for most Meritor
and Meritor WABCO products. $20. Specify TP-9853.
How to Obtain Tools and Supplies
Specified in This Manual
Call ArvinMeritor’s Commercial Vehicle Aftermarket at
888-725-9355 to obtain Meritor tools and supplies.
To Next Page
Loading...