RKI Instruments GX-6000 - Turning the Password Function on or off

GX-6000 Operator’s Manual Turning the Password Function On or Off • 102
2 . Press and release the POWER/ENTER button. The ROM and checksum
values for your unit will be displayed.
3 . The first line displays the ROM number. The ROM number indicates the
firmware version number. In the above example, the ROM number is
05017. The bottom line displays the firmware file’s checksum, 62C7 in
the above example.
4 . Press and release the POWER/ENTER button again to return to the main
menu.
Turning the Password Function On or Off
With PASSWORD set to ON, the GX-6000 prompts you for a password
when you enter User Mode and Calibration Mode.
With PASSWORD set to OFF (factory setting), no password is required to
enter User Mode or Calibration Mode.
1 . From the main menu, place the cursor in front of PASSWORD.
2 . Press and release POWER/ENTER. The Password Protection Screen
appears.
3 . Use ▲AIR or SHIFT ▼ (PANIC) to display the desired setting.
ROM/SUM
ROM 05017
SUM 62C7
USER
USER PASSWORD
ON