163 • Using Maintenance Mode GX-6000 Operator’s Manual
1 . From the main menu, place the cursor next to IR AUTO RANGE.
2 . Press and release POWER/ENTER. The IR Auto Range Screen appears.
3 . Use ▲AIR or SHIFT ▼ (PANIC) to move the cursor in front of the
desired setting.
4 . Press and release POWER/ENTER to save the setting and return to the
main menu.
Updating the Confirmation Alert Setting
With CONFIRMATION set to ON, the GX-6000 periodically double beeps
and double flashes the LED arrays to verify that it is operating. The interval
between the confirmation alert can be defined once you set
CONFIRMATION to ON. The interval can be 1 - 60 minutes. The factory
setting is 5 minutes.
With CONFIRMATION set to OFF (factory setting), the GX-6000 does not
provide a confirmation alert.
1 . From the main menu, place the cursor next to CONFIRMATION.
2 . Press and release POWER/ENTER. The Confirmation Alert Screen
appears.
3 . Use ▲AIR or SHIFT ▼ (PANIC) to display the desired setting.
4 . Press and release POWER/ENTER to save the setting. If you set
CONFIRMATION to OFF, the instrument will return to the main
menu.
5 . If you set CONFIRMATION to ON, the interval screen will appear
6 . Use ▲AIR or SHIFT ▼ (PANIC) to display the desired setting.
7 . Press and release POWER/ENTER to save the setting and return to the
main menu.
MAINTE
CONFIRMATION
5
MIN
To Next Page
Loading...
Need help?
General
