191 • Parts List GX-6000 Operator’s Manual
dummy sensor should be installed in the smart sensor 2 position. See the
figure below for the location of the smart sensor 1 and 2 positions.
Figure 39: Smart Sensor Positions
Parts List
Table 23: ESS-03 GX-6000 Parts List
Part Number Description
80-0006-XXP Sample hose with integral probe, with hydrophobic filter and particle
filter, no scrubber section. For use with NH
3
, HCN, NO
2
, and SO
2
sensors. Replace “XX” with length in feet. 3 foot hose is standard.
Available lengths for the GX-6000 are 3, 5, 10, 15, 20, 25, 30, 35, 40,
45, and 50 feet.
H2S
CO
Smart Sensor 1
Position
Smart Sensor 2
Position
To Next Page
Loading...
