RKI Instruments GX-6000 - Page 201

GX-6000 Operator’s Manual Parts List • 192
80-0006-XXP-01 Sample hose with integral probe, no particle filter, no scrubber section.
For use with Cl
2
sensor. Replace “XX” with length in feet. 3 foot hose
is standard. Available lengths for the GX-6000 are 3, 5, 10, 15, 20, 25,
and 30 feet.
80-0172 Probe, with hydrophobic filter and particle filter, no scrubber section.
For use with NH
3
, HCN, NO
2
, and SO
2
sensors.
80-0172-01 Probe, with hydrophobic filter, no particle filter, no scrubber section. For
use with Cl
2
sensor.
81-0142RK-02 Calibration cylinder, 5-gas (SO
2
, CH
4
, O
2
, H
2
S, CO), 58-liter aluminum
81-0142RK-04 Calibration cylinder, 5-gas (SO
2
, CH
4
, O
2
, H
2
S, CO), 34-liter aluminum
81-0170RK-02 Calibration cylinder, 5 ppm SO
2
in nitrogen, 58 liter
81-0170RK-04 Calibration cylinder, 5 ppm SO
2
in nitrogen, 34 liter
81-0176RK-02 Calibration cylinder, 25 ppm NH
3
in nitrogen, 58 liter
81-0176RK-04 Calibration cylinder, 25 ppm NH
3
in nitrogen, 34 liter
81-0182RK-02 Calibration cylinder, 5 ppm NO
2
in air, 58 liter
81-0182RK-04 Calibration cylinder, 5 ppm NO
2
in air, 34 liter
81-0190RK-02 Calibration cylinder, 5 ppm Cl
2
in nitrogen, 58 liter
81-0190RK-04 Calibration cylinder, 5 ppm Cl
2
in nitrogen, 34 liter
81-0196RK-02 Calibration cylinder, 10 ppm HCN in nitrogen, 58 liter
81-0196RK-04 Calibration cylinder, 10 ppm HCN in nitrogen, 34 liter
ESS-03DH-HCN Hydrogen cyanide sensor, 0 - 15.0 ppm
ESS-03DH-NO2 Nitrogen dioxide sensor, 0 - 20.00 ppm
ESS-03DH-SO2 Sulfur dioxide sensor, 0 - 99.90 ppm
ESS-B332-NH3 Ammonia sensor, 0 - 400 ppm
ESS-B335-CL2 Chlorine sensor, 0 - 10.0 ppm
Part Number Description