59 • Display Mode GX-6000 Operator’s Manual
Viewing Snap Logger Data
The Snap Logging Screen allows you to view data from previous snap logs.
For information on how to use the snap logging feature, see “Snap Log
Mode” on page 34.
1 . With the snap logging screen displayed, press and release the POWER/
ENTER button. The screen that appears will depend on whether or not
any snap logs have been taken.
2 . If snap logs have been taken, the screen indicates the year, month, day,
and time that the most recent snap log was taken.
The number near the bottom of the screen indicates the snap log ID
number. The first snap log that is taken is given an ID of 001. The next
snap log ID is 002. The ID number increases sequentially with each set
of snap log data.
The last line of the screen indicates the Station ID that was used for the
snap log.
3 . Use the ▲AIR and SHIFT ▼ (PANIC) buttons to scroll through different
snap log IDs.
DISP
REC. DATA DISP
YES :ENTER
NO :DISP
EXIT :RESET
REC DATA
REC. DATA
NO DATA
REC DATA
DATE
5/20/2015
MM/DD/YYYY
3:40
NUMBER 001
TANK 5
No snap logs taken Snap logs taken
To Next Page
Loading...
Need help?
General
