55 • Display Mode GX-6000 Operator’s Manual
Select User ID Screen
This screen only appears in Display Mode if the ID DISPLAY item in
Maintenance Mode is set to ON. Use this screen to select a user ID from the
user ID list in the GX-6000’s memory. The current user ID is displayed. A
user ID can be up to 16 characters long. The GX-6000 can store up to 128
user IDs.
The user ID provides a way to identify the GX-6000 user during a data
logging session. If the user ID is changed during an operating session, a new
data session is initiated with the new user ID attached to it. This allows you to
change the user ID during operation and have each user ID that was used
during an operating session saved for the corresponding data. See the GX-
6000 Data Logger Management Program Operator’s Manual for a detailed
description of data logging and the user ID.
The user ID list cannot be edited using the GX-6000 user interface. The GX-
6000 Maintenance Data Loader Program is required to define or change user
IDs in the user ID list. For a detailed description of editing the list of user IDs
stored in the GX-6000, see the GX-6000 Maintenance Data Loader Program
Operator’s Manual.
To Next Page
Loading...
Need help?
General
