GX-6000 Operator’s Manual Using Maintenance Mode • 160
1 . From the main menu, place the cursor next to PUMP OFF DISP.
2 . Press and release POWER/ENTER. The Pump Off Display Screen
appears.
3 . Use ▲AIR or SHIFT ▼ (PANIC) to display the desired setting.
4 . Press and release POWER/ENTER to save the setting and return to the
main menu.
Turning the User/Station ID Function On or Off
With ID DISPLAY set to ON, the User ID and Station ID Screens display
during start up and in Display Mode.
With ID DISPLAY set to OFF (factory setting), the User ID and Station ID
Screens do not display during start up or in Display Mode.
1 . From the main menu, place the cursor next to ID DISPLAY.
2 . Press and release POWER/ENTER. The User and Station ID’s Screen
appears.
3 . Use ▲AIR or SHIFT ▼ (PANIC) to display the desired setting.
4 . Press and release POWER/ENTER to save the setting and return to the
main menu.
Updating the Backlight Time Setting
This setting indicates the length of time the LCD illuminates when you press
any button. The minimum setting is OFF; the maximum setting is 255
seconds. The factory setting is 30 seconds.
1 . From the main menu, place the cursor next to BACK LIGHT TIME.
2 . Press and release POWER/ENTER. The Back Light Time Screen
appears.
3 . Use ▲AIR and SHIFT ▼ (PANIC) to adjust the time to the desired
setting.
4 . Press and release POWER/ENTER to save the setting and return to the
main menu.
Updating the Language Setting
This setting allows you to select the language for the GX-6000’s user
interface. The available choices are English (factory setting), Japanese,
Italian, Spanish, German, French, Portuguese, Russian, and Korean.
1 . From the main menu, place the cursor next to LANGUAGE.
2 . Press and release POWER/ENTER. The Select Language Screen
appears with the cursor in front of the current language.
To Next Page
Loading...
Need help?
General
