147 • Using Maintenance Mode GX-6000 Operator’s Manual
12 . The main menu displays. It displays eight menu items at a time.
13 . Use the â–²AIR or SHIFT â–¼ (PANIC) button to move the cursor up and
down through the menu items. Additional items are available above and
below the items currently displayed on the screen. They will appear as
you scroll farther up or down the current list using the â–²AIR or SHIFT
â–¼ (PANIC) buttons.
Setting the Date and Time
1 . From the main menu, place the cursor next to DATE.
2 . Press and release POWER/ENTER. The date and time will be displayed
with the year flashing.
3 . Use â–²AIR or SHIFT â–¼ (PANIC) to display the desired year.
4 . Press and release POWER/ENTER to save the setting. The month setting
flashes.
5 . Repeat Step 3 and Step 4 to enter the month, day, hours, and minutes
settings. The main menu displays after you enter the seconds setting.
MAINTE
MAINTENANCE
DATE
DATE FORMAT
GAS CALIBRATION
CAL SETTING
BUMP SETTING
ALARM SETTING
PUMP OFF DISP
ID DISPLAY
DATE
DATE
5/ 1/2015
MM/DD/YYYY
12:55
To Next Page
Loading...
Need help?
General
