RKI Instruments GX-6000 - Setting the Date Format; Configuring the Channels

99 • Setting the Date Format GX-6000 Operator’s Manual
Setting the Date Format
The date can be displayed in three ways, MM/DD/YYYY (factory setting),
DD/MM/YYYY, or YYYY/MM/DD.
1 . From the main menu, place the cursor next to DATE FORMAT.
2 . Press and release POWER/ENTER. The Date Format screen appears
with the current setting flashing.
3 . Use ▲AIR or SHIFT ▼ (PANIC) to display the desired setting.
4 . Press and release POWER/ENTER to save the setting and return to the
main menu.
Configuring the Channels
The CONFIGURE CH menu item allows you to rearrange the display order
of the active channels.
1 . From the main menu, place the cursor next to CONFIGURE CH.
2 . Press and release POWER/ENTER. The Configure Channels screen
appears with the cursor next to CH1.
3 . Use ▲AIR or SHIFT ▼ (PANIC) to move the cursor next to the channel
you want to configure.
USER
CONFIGURE CH
CH 1 : CH4 (HC )
CH 2 : O2 (OX )
CH 3 : H2S (H2S )
CH 4 : CO (CO )
CH 5 : VOC (SM1)
ESCAPE