103 • Exiting User Mode GX-6000 Operator’s Manual
4 . If you selected OFF, press and release POWER/ENTER to save the
setting and return to the main menu.
If you selected ON, continue with Step 5.
5 . Press and release POWER/ENTER. The Set Password Screen appears.
0000 is at the bottom of the screen with the first 0 flashing.
6 . Use ▲AIR or SHIFT ▼ (PANIC) to display a number from 0 to 9.
7 . Press and release POWER/ENTER to enter the selection and advance to
the next number.
8 . Repeat Step 6 and Step 7 to select the remaining numbers. When you
press and release POWER/ENTER to enter the last number, the
password is saved and you return to the main menu.
Exiting User Mode
1 . From the main menu, place the cursor in front of START MEASURE at
the bottom of the menu.
2 . Press and release POWER/ENTER.
3 . The unit will begin its start-up sequence.
USER
USER PASSWORD
INPUT
PASSWORD
0 0 0 0
To Next Page
Loading...
