GX-6000 Operator’s Manual Display Mode • 58
To select a different station ID:
1 . With the Select Station ID Screen displayed, press and release the
POWER/ENTER button. The current user ID will be displayed and it
will be flashing.
2 . Use the ▲AIR and SHIFT ▼ (PANIC) buttons to scroll through the
available station IDs. The list will wrap around if you get to the top or
bottom. Any of the station IDs in the list that have not been changed
from the factory setting will be shown as STATION_ID_XXX where the
“XXX” is a number from 001 to 128.
3 . When the desired station ID is displayed, press and release the POWER
ENTER button.
NOTE: To exit the selection screen without saving a change, press and
release the DISP/LOCK button. You will return to the Select Station
ID screen without saving the station ID change.
4 . The unit will save the selected station ID as the current one and return
you to the Select Station ID Screen.
To Next Page
Loading...
Need help?
General
