RKI Instruments GX-6000 - Page 244

235 • Benzene Select Mode GX-6000 Operator’s Manual
b. The STEL measurement takes 15 minutes and a countdown displays
at the bottom of the screen. The STEL reading is displayed at the top
of the screen and the instantaneous reading is displayed below it.
c. To cancel the STEL measurement, press and release the RESET
button. Then press and release the POWER/ENTER button.
d. At the end of the STEL countdown, the STEL reading displays.
e. To repeat the STEL measurement, press and release POWER/
ENTER.
TUBE
BNZ STEL
STEL MEASURING
EXIT :RESET
900SEC
0.00
ppm
ppm
0.00
TUBE
BNZ STEL
CANCEL ?
YES :ENTER
NO :DISP
0.00
ppm
ppm
0.00
TUBE
BNZ STEL
REPEAT ?
YES :ENTER
NO :DISP
0.00
ppm