Roche cobas b 123 - Page 280

Roche Diagnostics
280 Instructions for Use · Version 13.0
10 Software functions cobas b 123 POC system
Configuring operator settings
p To edit an operator’s settings
1 Utilities > Configuration > Operators
Figure 10-41 Operator settings screen
2 To edit the operator’s settings, press the Edit button.
A dialog box appears on the screen.
Figure 10-42 Editing operators screen
3 To edit the operator’s information, choose the corresponding parameter from the
drop-down list. Then, press the button. Enter your operator’s information
using the alphanumeric keyboard or dialog box that appears on the screen.
4 To apply your changes, press the OK button.
s