Samsung WEC8050 - Figure 190. Qos Configuration of a Wireless Terminal (1); Figure 191. Qos Configuration of a Wireless Terminal (2)

WEC8500/WEC8050 (APC) Operation Manual v10.1 268
©Samsung Electronics America
Figure 190. QoS Configuration of a Wireless Terminal (1)
[Wireless tab]
Figure 191. QoS Configuration of a Wireless Terminal (2)
QoS Configuration of AP
Wire Section
The APC provides QoS in a wire section using 802.1p and Differentiated Services Code
Point (DSCP) marking and it can adjust packet traffics because it can adjust queue length
depending on packet type.
Configuration using CLI
To configure the Station QoS parameter that will be applied to the wire section between
APC and AP, execute the command as follows:
1 Go to configure  QoS mode of a wireless section of CLI.