Samsung WEC8050 - Captive Portal

WEC8500/WEC8050 (APC) Operation Manual v10.1 378
©Samsung Electronics America
Captive Portal
The W-EP WLAN system provides the Captive Portal function. A Web Certified user can
receive a normal service after connected to a specific WLAN (SSID) and going through
user authentication.
Configuring Web Authentication User
Configuration using CLI
To configure Web authentication User, go to the Configure mode and execute the
command.
1 Go to configure  security  captive-portal configuration mode of CLI.
APC# configure terminal
APC/configure# security
APC/configure/security# captive-portal
APC/configure/security/captive-portal#
2 The command to add a web authentication user is as follows:
o Web-auth-users add [ID] [PASSWD] [START_TIME] [END_TIME]
Parameter
Description
ID
Login ID of a user
PASSWD
Password
START_TIME
Start time (YYYY-MM-DD:HH:MM:SS format)
END_TIME
End time (YYYY-MM-DD:HH:MM:SS format)
3 The command to add a web authentication user is as follows:
o Web-auth-users delete [ID]
Parameter
Description
ID
User ID
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select
<Security>  <AAA>  <Local Net Users>  <Web Authentication Users> menus in the
sub-menus.