WEC8500/WEC8050 (APC) Operation Manual v10.1 328
©Samsung Electronics America
Checking Voice Related Quality Information
Configuration using CLI
Execute the following command to check the voice related quality analysis (Voice Quality
Monitoring) information:
1 Operator can check the voice quality analysis information of a wireless
terminal that has an active call.
WEC8500# show voice vqm current-stats brief
========================================================
[CONN-740 Start Time=2013/7/19.14:47:27, Duration=47 sec(s)
Call-ID[f03c77b50564418855587192e12b889d <-> ca371fce-6e10-401a-9a4e-
dd53678804c6@ug1.scm.com] Session id :0
SRC [I/F=ge4 Phone-No=9960, IP=20.20.20.30:22458]
DST [I/F=ge4 Phone-No=9910, IP=20.20.20.25:25407]
RTP Flow Quality Metrics:
[Flow-1] DIR=Forward Quality Ratings=Poor [MOS-LQ=3.06, MOS-CQ=2.82, MOS-PQ=3.35]
RTP Flow Quality Metrics:
[Flow-2] DIR=Reverse Quality Ratings=Good [MOS-LQ=4.04, MOS-CQ=3.95, MOS-PQ=3.89]
WEC8500#
2 Operator can check the voice quality analysis information of a wireless
terminal that has a completed call.
To Next Page
