Samsung WEC8050 - MAC Filter

WEC8500/WEC8050 (APC) Operation Manual v10.1 396
©Samsung Electronics America
MAC Filter
The W-EP wireless LAN system provides the MAC filter function. A user may experience
connection restriction due to MAC filtering when connecting to a specific WLAN (SSID).
Configuration using CLI
To configure a MAC list for connection control by the MAC filter, execute the command
as follows:
1 Go to configure  security configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# security
2 Creates a MAC filter list.
WEC8500/configure/security# mac-filter [ID]
Parameter
Description
ID
MAC filter list table ID (range: 1-20)
3 Configure the filtering policy.
WEC8500/configure/security/mac-filter 1# policy [POLICY]
Parameter
Description
POLICY
Table policy of MAC filtering list
4 Configure a MAC entry.
WEC8500/configure/security/mac-filter 1# mac [MAC_ADDRESS]
Parameter
Description
MAC_ADDRESS
MAC address (XX:XX:XX:XX:XX:XX format)
5 Specify the MAC filter ID that is configured in the WLAN to which a MAC
filter will be applied.
WEC8500/configure/wlan 1/security# mac-filter <MAC_FILTER_ID>
Parameter
Description
MAC_FILTER_ID
MAC FILTER ID (range: 1-20)