WEC8500/WEC8050 (APC) Operation Manual v10.1 29
©Samsung Electronics America
(3) +WPA2 and enabled 802.1x
6 DHCP proxy:
o When an external DHCP server is used, configure settings of proxy
or relay.
7 DHCP internal server:
o Configure a DHCP internal server. For more information, refer to
‘5.4.1 DHCP Server’.
8 DNS:
o The APC gets DNS information from a DNS server and provides the
DNS relay function that relays the DNS server and a client. If a DNS
server is connected to the APC and a UE connected to the APC
configures the DNS server as the APC, the DNS service can be
received.
9 NTP:
o If the APC is configured as a NTP client, it receives the Coordinated
Universal Time (UTC) information from the configured NTP server
and synchronizes the local time.
10 Finish:
o Finish the basic settings to configure the WLAN of the APC and then
close the wizard.
To Next Page
