Schenck process Disomat Opus User Manual

Function Variants Weighbridge ZEUS
Acknowledge input.
System prompts for input of vehicle empty weight; overwrite suggested value:
Weight 0.00t
Acknowledge input.
elease Weighing Operation
s for release of weighing operation.
R
System prompt
Select using arrow keys.
Contin: Weigh
Contin: Abort
Contin: Weight
Acknowledge selection.
After
Contin: Weigh
ZEUS starts printing, returns to home position and is ready to start next weighing
operation.
After
Contin: Abort
all data entered are deleted. ZEUS returns to home position and is ready to start next
Weighing Using Fixed Tare Weight
Procedure is simi laced by
initial ac pty weight.
ollow these steps:
weighing operation.
lar to that of First/Second Weighing. First weighing is rep
quisition of vehicle em
F
+
Use 'SHIFT' and 'LEFT arrow' keys to go to menu item
FIXED TARE FILE.
Acknowledge with ENTER.
System prompts for input of vehicle number.
VehNo.: 345 XYZ
Acknowledge input.
DISOMAT
®
Opus – Operating Manual 0630 BV-H2313 GB
© Schenck Process GmbH, Darmstadt - 125 -

Schenck process Disomat Opus Specifications

General

Brand	Schenck process
Model	Disomat Opus
Category	Control Panel
Language	English