Schenck process Disomat Opus User Manual

Event Messages List of Event Messages
Display Text Edit *) Cause Remedy
S9812:Parameter Error Measuring module 2 improperly
calibrated
Exchange
measuring
module.
W9911:Check Scale 2 and Twin-unit Scale 1 and Twin-unit
calibration parameters
inconsistent
Check/set Scale
2 and Twin-unit
calibration
parameters.
*) These events allow the default event class to be changed
(see Item 5.3.2.9 'Fct.434_Event Classes')
**) Various identification numbers (IDs) not listed in this documentation can be
output . They are designed to assist the suppliers' service engineers in
troubleshooting.
BV-H2313 GB 0630 DISOMAT
®
Opus – Operating Manual
- 140 - © Schenck Process GmbH, Darmstadt

Schenck process Disomat Opus Specifications

General

Brand	Schenck process
Model	Disomat Opus
Category	Control Panel
Language	English