DISOMAT Overview Control Elements
You can also switch over the weight display (**) for an additional (alternating)
display of
• Balance total
• Date and time
• Contact position (Inputs/Outputs)
(**) See BV-H2313: Chapter 'Home Position Output' and 'Fct. 55 Select Home Position'.
A legal-for-trade scale
has to be operated in the weight display (=Net).
The display is used for showing
d including status information,
4. operator guidance or prompt for operator inputs
e with unit, e.g. 357.4 kg. For details,
dditional symbols or texts can be output:
1. the weight measure
2. event messages,
3. the dialogs of the functions of the menu tree,
1. Weight Display including status information
The measured weight is displayed complet
a
Display Meaning
357.4
- 5.4
gn, e.g. with scale relieved if tare has been acquired.
Weight Value
The weight display shows the weight acquired by the scale.
Negative si
kg
nd lbs.(lb), newton (N), kilonewton (kN)
Unit Sign
Unit of weight value, e.g.
ton(t), kilogram(kg), gram(g), pou
.
pace of the configured range; see
ossible; no event message is displayed.
'Scale in Zero Setting Range'
Displayed weight value is in the s
parameter 'Zero Setting Range'.
Function Zero Scale is p
T
been stored.
Stored Tare Value
A tare value > 0 has
PT
memory has not been acquired by scale but in
DP.
Preset Tare Value
1
Weight value stored in tare
manual or via E
Net play shows weight of load on scale minus the value stored in tare
NET Display
Weight dis
memory.
G
ay shows weight of load on scale.
GROSS Display
Weight displ
> <
ale is stable within certain limits (scale in no-motion).
No-Motion
Load on sc
Zero Set
Scale is totally relieved.
(Exact zero; GROSS value accurate to ±¼ d)
BV-H2313 GB 0630 DISOMAT
®
Opus – Operating Manual
- 10 - © Schenck Process GmbH, Darmstadt
To Next Page
Loading...
Need help?
General
