A2537-002/01 February 2020 3-3 SEMCO Proprietary Information
3.1.4 Optional Multi-Channel Bit Synchronizer, Frame Synchronizer, BERT and PN Generator
An optional three-channel programmable stand-alone Bit Sync, Frame Sync and BERT option is also
available. This option has user-selectable internal (from each demodulator) and external (from rear panel)
input switching, as well as a programmable Frame Sync, BERT and PN Pattern Generator. It can be used
as an independent Bit Sync/Frame Sync/BERT, used in conjunction with each channel’s demodulator
output for TTL and RS422 bit sync/frame sync outputs, and also used for BER loop testing of each receiver
and combiner channel.
3.1.5 TM over IP Option
The TM over IP option supports multiple IRIG standard telemetry data formats; DQM/DQE interfaces and
user specified custom interfaces (consult the factory). The main interfaces required by users will be the
IRIG PCM data Interfaces and IRIG Chapter 10 Interfaces. The embedded TM over IP function accepts
data and clock signals from the three receiver demodulators. A dedicated Ethernet output connection is
provided on the receiver rear panel for the TM over IP connection and auto detects at 10, 100 or 1000
Mbps. Operation can be over a UDP or TCP connection.
3.1.6 Additional RC100C-2 Hardware
Additional RC100C-2 hardware includes a Linux ARM Processor; one multi-port ESOM Ethernet-to-
Serial/USB adapter; one 10 MHz Reference Oscillator and a Communications and Measurement assembly.
To Next Page
Loading...