Cirklon Sequencer User Manual
The track control values are as follows:
applies real-time, variable quantisation to CK
patterns. The default quantisation grid is
taken from the pattern, but can be changed
using the tbase track control value.
the Swing control from the main play menu
operates in tandem with this control.
transposes notes as a proportion of the
interval between the note and a centre note.
(default centre note is C 4)
sets the centre note for the note% scaling
control.
adjusts velocity values as a proportion of the
distance from a centre velocity value.
sets the centre velocity value for velo%
scales the lengths of notes
sets the spacing for the grid used by the
quant% value.
transposes notes by octaves.
the knob1 value used for knob mask and grab
events in P3 patterns.
the knob2 value used for knob mask and grab
events in P3 patterns.
The effects of some of these controls will be fairly obvious.
Others are best experimented with, to see what uses you may find for them.
To Next Page
Loading...
