Cirklon Sequencer User Manual
Directions
The direction setting for each pattern determines what order the steps will be played in.
The available options are shown in the selection list:
The currently active direction is shown with an arrow before it.
The behaviour of each direction is shown in the following table:
Steps play in ascending order, looping back to step 1 after the last step is
reached
The pattern will play in reverse, starting from step 1, and looping back to the
last step after step 1
The pattern will play in reverse, starting from the last step, and looping back
to the last step after step 1
The pattern will play in forward then reverse B directions, as described
above
The pattern will play forward until the last step, and then reverse direction
without playing the last step twice
After each step the pattern will randomly:
move to the next step (50% chance)
move to the previous step (25% chance)
repeat the current step (25% chance)
There is a 50% chance of moving to the next, or previous step.
Note that steps with skip set are skipped in all direction modes.
References in the above table to step 1 really mean the lowest numbered step without skip
active.