Sequentix CIRKLON - Knob Mask Events

Sequentix Music Systems
Cirklon Sequencer User Manual
13-25
Mask gate,Kn>n defeat gate unless knob is > n range: 0 - 127
Mask gate,Kn~n defeat gate unless knob is near n range: 0 - 127
Mask gate,Kn<n defeat gate unless knob is < n range: 0 - 127
Mask tie,Kn>n defeat tie unless knob is > n range: 0 - 127
Mask tie,Kn~n defeat tie unless knob is near n range: 0 - 127
Mask tie,Kn<n defeat tie unless knob is < n range: 0 - 127
Mask auxB,Kn>n defeat aux B unless knob is > n range: 0 - 127
Mask auxB,Kn~n defeat aux B unless knob is near n range: 0 - 127
Mask auxB,Kn<n defeat aux B unless knob is < n range: 0 - 127
Mask auxC,Kn>n defeat aux C unless knob is > n range: 0 - 127
Mask auxC,Kn~n defeat aux C unless knob is near n range: 0 - 127
Mask auxC,Kn<n defeat aux C unless knob is < n range: 0 - 127
Mask auxD,Kn>n defeat aux D unless knob is > n range: 0 - 127
Mask auxD,Kn~n defeat aux D unless knob is near n range: 0 - 127
Mask auxD,Kn<n defeat aux D unless knob is < n range: 0 - 127
Mask nAcc,Kn>n defeat note accumulator unless knob is > n range: 0 - 127
Mask nAcc,Kn~n defeat note accumulator unless knob is near n range: 0 - 127
Mask nAcc,Kn<n defeat note accumulator unless knob is < n range: 0 - 127
Mask vAcc,Kn>n defeat velo accumulator unless knob is > n range: 0 - 127
Mask vAcc,Kn~n defeat velo accumulator unless knob is near n range: 0 - 127
Mask vAcc,Kn<n defeat velo accumulator unless knob is < n range: 0 - 127
Mask dAcc,Kn>n defeat aux D accumulator unless knob is > n range: 0 - 127
Mask dAcc,Kn~n defeat aux D accumulator unless knob is near n range: 0 - 127
Mask dAcc,Kn<n defeat aux D accumulator unless knob is < n range: 0 - 127
Knob Grab Events
These events take the current value from either knob value, and use it to over-write the
pattern values.
The knobs for these events are not automatically assigned – the aux value is used to select
from front panel knobs A and B, or track control values knob1 or knob2, so a different knob
source can be assigned on different steps.
knob n to velo replace length value with current value of knob n
knob n to leng replace velocity value with current value of knob n
knob n to auxC replace aux C value with current value of knob n
knob n to auxD replace aux D value with current value of knob n