Cirklon Sequencer User Manual
Note that bar values are not moved in this operation.
ReSync
The resync menu option toggles the automatic resynchronisation of patterns on or off.
Patterns are normally resynchronised at the end of the global bar whenever an edit is made
that changes the effective length of the pattern.
Such edits include changes to direction, timebase, step skipping and bar length.
Sync
The sync function allows you to manually reset pattern playback to the first step of the bar.
Apply FTS
This option permanently applies the current “force to scale” setting to the notes of the pattern.
Force To Scale is a scene-level setting, and will be covered in the following chapter on scenes.
Aux Macro & Accumulator Config
The aux macros are pre-defined sets of aux event assignments for the aux rows.
The accumulator config page allows you to alter pattern settings related to advanced use of
aux events. Please refer to the later section on aux events.
Having covered just about everything in pattern edit for P3 patterns, let’s get back to some
higher level operations.
To Next Page
Loading...