Cirklon Sequencer User Manual
auto - the fill pattern will play if the track is active (un-muted)
active - the fill pattern will always play
mute - the track will be muted during a fill-on
no fill - the track will ignore the fill-in
At the top right of the fill config page, the fill release setting is shown.
This determines when the tracks will return to their main pattern after a fill has been
triggered, as follows:
key - fill patterns play only while the FILL key is held
bar - fill patterns play until the end of the next global bar
scene - fill patterns play for the rest of the current scene
Change the release option using the VALUE encoder.
Note that in pattern edit, the FILL key is assigned a different purpose, you can only trigger a
fill-in while on the SONG, SCENE or TRACK pages.
Pattern edit and real-time record will act on the fill pattern if the FILL field is selected on the
TRACK page when you enter pattern edit or record modes.
The fill pattern on the current edit track will play continually while you are editing or
recording it if the user config option “play fills in edit/record” is enabled – see the section on
“Play Mode Menu” for details of setting user config options.
To Next Page
Loading...
