Figure 135: Performance options
NOTE
•
The configurable performance options depend on the operating mode selected.
•
The performance options are dependent on each other.
•
A teach-in process must be performed after most changes. A button is provided in
the performance options for this purpose.
►
Click on the button to perform the teach-in and to apply the changed power
options.
✓
The system boundaries resulting from the performance options are displayed on
the left in SOPAS ET (see "System boundaries and status", page 96).
8 CONFIGURATION WITH SOPAS ET
136
O P E R A T I N G I N S T R U C T I O N S | MLG-2 ProNet 8018748.1Q3I/2024-12-18 | SICK
Subject to change without notice
To Next Page
Loading...
