Siemens SIREMOBIL Iso-C

72 Adjustments / Programs
SIREMOBIL Iso-C SPR2-230.840.01.01.02 © Siemens, 2008
08.08 CS PS SP
Page 72 of 148
For internal use only
Evaluation 0
Calculate the deviation between the measured dose-area product and the displayed
dose-area product:
The deviation must be < 0.25 .
Deviation = [(displayed dose-area product FDPa) - (measured dose-area product FDPg) ]
/ (measured dose-area product FDPg)
For deviations > 0.25 , the dose-area product measurement device must be replaced.