Siemens SIREMOBIL Iso-C

© Siemens, 2008 SPR2-230.840.01.01.02 SIREMOBIL Iso-C
08.08 CS PS SP
Replacing boards and components 87
Page 87 of 148
For internal use only
Power Supply M14, +5 V / +15 V / -15 V 6.6
WARNING
Electrical voltage!
¹ See (Safety information / p. 11).
¹ Switch the system power supply off and disconnect the
power plug.
x Replace the power supply.
x Check the power supply voltage and adjust it if necessary. See (Checking the operat-
ing voltages / p. 30).