© Siemens, 2008 SPR2-230.840.01.01.02 SIREMOBIL Iso-C
08.08 CS PS SP
Replacing boards and components 99
Page 99 of 148
For internal use only
Replacing the Compact optics 6.12
Fig. 32:
WARNING
Electrical voltage!
¹ See (Safety information / p. 11).
¹ Switch the SIREMOBIL Compact off and wait approxi-
mately 3 minutes for the voltage in the I.I. mini-voltage
supply to drop.
WARNING
Risk of injury on mechanical parts!
If these guidelines are not followed, minor to moderate injury,
especially to the hands, can occur.
¹ Follow the notes concerning the C-arm carbon fiber
structure.
CAUTION
Risk of injury!
Noncompliance can lead to minor to medium injury and/or
property damage.
The C-arm covers contain counterbalance weights and weigh
approx. 6 kg. Hold the covers firmly when installing or remov-
ing them.
¹ Before the C-arm cover is loosened, the C-arm must be
moved to its middle orbital position. If the C-arm cov-
ers are loosened, the C-arm may not be moved to its
orbital end positions (I.I. or SIREPHOS at the orbital
end position).