Siemens SIREMOBIL Iso-C

82 Replacing boards and components
SIREMOBIL Iso-C SPR2-230.840.01.01.02 © Siemens, 2008
08.08 CS PS SP
Page 82 of 148
For internal use only
Interface board D30 6.2
x Replace interface board D30.
x Check the +27 V /+24 V /+24 V voltage. Adjust, if necessary. See (Checking the operat-
ing voltages / p. 30) in these instructions, Checking the operating voltages.
x Check the radiation release / format switch over / vertical column travel / brakes func-
tions.