Siemens SIREMOBIL Iso-C

34 Loading the operating software
SIREMOBIL Iso-C SPR2-230.840.01.01.02 © Siemens, 2008
08.08 CS PS SP
Page 34 of 148
For internal use only
Option 3D reconstruction, trace file, and event log file 4.2
Saving trace files 0
NOTE
When an occurs, the trace is filed with date and time as a Zip
file in the operating system on drive
C:\trace\trace_Vxxx_####.zip
x Insert an empty formatted floppy disk in drive A of the syngo PC.
x In syngo, select the "local service" menu and enter the service key.
x Activate the button "Copy Trace to Drive A" (Fig.9/p.34).
x All available trace files are copied onto the floppy disk as a Zip file.
Fig. 9:
NOTE
In the copying process, all already available older files are
also copied until a floppy disk is full, but the youngest always
first. Vxxx = SW-Version, e.g. VB00A; #### = error number,
e.g. 1136
Saving current trace files directly after display of an error 0
x Each time the system is switched on a trace file SPETrace_00.TRC is created and writ-
ten and filed under the drive C:\Trace\SPETrace_00.TRC. The current error trace can
be saved via "local service" Utilities, source, "escape to OS".
x Insert an empty formatted floppy disk in drive A of the syngo PC.