© Siemens, 2008 SPR2-230.840.01.01.02 SIREMOBIL Iso-C
08.08 CS PS SP
Adjustments / Programs 73
Page 73 of 148
For internal use only
Overview of SIREMOBIL Iso-C Parameters 5.14
Select the Moreinfo.hlp help file on the service PC for a short description of the parameters
available on the SIREMOBIL Iso-C.
NOTE
If parameters have been changed and saved in the "Adjust-
ments, Parameter" menu with Save to file, you must exit the
service program with "Logoff" and "Quit" to save the modi-
fied parameters to the disk.
To Next Page
Loading...
