80 Replacing boards and components
SIREMOBIL Iso-C SPR2-230.840.01.01.02 © Siemens, 2008
08.08 CS PS SP
Page 80 of 148
For internal use only
x Check the display functions and setting of the blades on the monitor. Adjust, if neces-
sary.
x Ensure that the dose-area product measurement device (where present) is functioning
correctly.
x Ensure that the laser targeting device (where present) is functioning properly.
x Test the FL / PFL / DR and direct exposure functions of the SIREMOBIL Iso-C.
To Next Page
Loading...
