SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018 110
2. If you want to view or configure the 2.4GHz band settings, click 2.4 GHZ Band in the left menu.
3. Modify the settings as desired, using the information provided in the table below.
4. (Optional) Define up to three virtual access points for guest access using the information from the Wireless - Guest/Vir-
tual Access Points section of the table below.
5. Click Apply/Save to commit your settings.
Field Name Description
Enable Wireless This option is selected by default. To disable the wireless feature, clear the checkbox. All other fields
on the page are hidden.
Enable WiFi Button This option is selected by default. To disable the gateway's 2.4GHz button, clear the checkbox.
Enable Wireless Hot-
spot 2.0
This option is disabled.
Hide Access Point Click to hide the access point SSID from end users and passive scanning.
Clients Isolation Click to prevent LAN client devices from communicating with one another on the wireless network.
Disable WMM Advertise Click to stop the wireless from advertising Wireless Multimedia (WMM) functionality. Selecting this
option can improve transmission performance for voice and video data.
Enable Wireless Mult-
icast Forwarding
This option is selected by default allowing multicast traffic to be forwarded across wireless clients. This
option can improve the quality of video services such as IPTV. To disable Wireless Multicast Forwarding
(WMF), clear the checkbox.
SSID (Optional) Enter the WiFi SSID. For security purposes, this identifier should be unique for your system. If
your gateway is connected to an ACS, it is recommended that SSID names be be 1 - 32 characters long.
Special characters are accepted.
BSSID Displays the Basic Service Set Identifier (BSSID), the MAC address assigned to the wireless router.
Country This option is set by default and cannot be changed. The wireless channel adjusts to the frequency pro-
vision for the selected country.
Country RegRev This option is set to 871 and cannot be changed.
Max Clients Enter the maximum number of clients that can access the route wirelessly. Options are 1 through the
value set in the Global Max Clients field on the Wireless > Advanced page. The default is 20.
Note: Before you can change this setting, you must change the Global Max Clients setting.
Wireless - Guest/Virtual Access Points section
Enabled Click to enable a virtual wireless access point for guest access.
SSID Enter the wireless SSID for guests to use.
Hidden Click to hide the SSID from being broadcast publicly.
Isolate Clients Click to prevent client PCs from communicating with one another.
Enable WMM Advertise Click to stop the wireless from advertising Wireless Multimedia (WMM) functionality.
To Next Page
Loading...
