SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018 127
2. In the Sample Interval section, select the number of seconds for sampling to occur. Options are 5, 10, 15, and 20
seconds. The default is 5 seconds.
3. In the Start/Stop Data Collection section, configure the data sample:
a. Click Start collecting data every.
b. Select the days of the week when the data should be collected.
c. In the From and To fields, enter the start and end times for collection.
4. In the Database Size section, configure the database size limits:
a. In the Database Size field, enter the maximum size for the database file where the collected data will be stored.
The default is 2 MB.
b. (Optional) Select whether to stop data collection when the maximum size is reached. Options are Overwrite
Older Data and Stop Datacollection. The default is Overwrite Older Data.
5. (Optional) In the Counters section, clear any counter options that you do not need. The default is to collect all counters.
6. Click Submit to save the configuration.
7. To export a database, in the Export Database section:
1. Click Save Database to File. The open/save dialog box appears.
2. Click OK to save or click Open and OK to view.
Site Survey
On this page, you can view signal strength and other details for your wireless networks.
To Next Page
Loading...
