SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018 37
l Define a static IPv6 DNS IP address: Click Use the following Static IPv6 DNS address and enter the DNS server
IP addresses.
13. Click Next. The summary page appears indicating that your PPPoE WAN setup is complete.
14. Review the summary and either click Apply/Save to commit your changes or click Back to step through the pages in
reverse order to make any necessary alterations.
IP over Ethernet WAN Service
There are several parts to configuring an IP over Ethernet (IPoE) WAN service. You will progress through several pages to com-
plete the configuration.
Before you can configure a WAN service, make sure that the related Layer2 Interface has been configured.
To Next Page
Loading...
