SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018 84
Field Name Description
default is -1 (no minimum shaping rate).
PTM Priority Select the priority for this queue. Options are Low and High. The default is Low.
Queue Weight Enter the weighting value to associate with this queue. Options are 1 - 63. The default is 1.
Note: The higher the weighting value, the more frames that are sent proportionately given the WRR
algorithm employed. Traffic is given priority based on the combined values from this field and the Queue
Precedence field.
Scheduler
Algorithm
Select an algorithm for data priority in queues. Options are:
l Weighted Round Robin: Applies a fair round robin scheme weighting that is effective for networks
with fixed packet sizes, e.g., ATM networks.
l Weighted Fair Queuing: Applies a fair queuing weighting scheme via allowing different sessions to
have different service shares for improved data packets flow in networks with variable packet
size, e.g., PTM/IP networks.
Shaping Burst Size Enter the shaping burst size to be applied to packets in the defined queue. Options are 1600 bytes or
greater.
Shaping Rate Enter the shaping rate for packets in QoS queues. Options are 1 - 100000 Kbps. The default is -1 (no min-
imum shaping).
WLAN Queue
On this page, you can view the WLAN queues defined for your network.
Note: Make sure that wireless connection is active by going to Wireless and clicking Apply/Save.
In the left navigation bar, click Advanced Setup > Quality Of Service > QoS Queue > Wlan Queue. The following page appears.
To Next Page
Loading...
