SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018 123
Field Name Description
beacon) that the device waits before sending the beacon again.
Enter the time interval (in milliseconds) between beacon transmissions. Options are 1 - 65535 ms.
The default is 100 ms, which is recommended.
Global Max Clients Enter the maximum number of clients that can assess this wireless network at one time. The max-
imum for 5 GHz is 80; the maximum for 2.4 GHz is 128. The default is the maximum.
Note: You must change this field before you can change the Max Clients on the Wireless > Basic.
page.
Xpress™ Technology Select whether to enable Xpress Technology, a special accelerating technology for IEEE802.11g.
Options are Enable and Disable. The default is Enable.
Transmit Power Level Select the level of power used for transmittals. Options range from 4 dBm (2mw) to 18dBm (60 mw).
The default is 18 dBm (60 mw).
WMM (WiFi Multimedia) This technology allows multimedia services (audio, video and voice packets) to get higher priority for
transmission. Options are Auto, Enabled, and Disabled. The default is Enabled.
Warning: If you disable this option, all QoS queues and classifications defined for the wireless net-
work are also disabled.
WMM No Acknow-
ledgment
The acknowledge policy used at the MAC level. Enabling this option allows better throughput but, in
a noisy RF environment, higher -963 error rates may result. The default is Disabled, meaning that an
acknowledgment packet is returned for every packet received. This provides a more reliable trans-
mission but increases traffic load, which decreases performance. Disabling the acknowledgment can
be useful for Voice, for example, where speed of transmission is important and packet loss is tol-
erable to a certain degree. Options are Enabled and Disabled. The default is Disabled.
WMM APSD APSD (Automatic Power Save Delivery) is an automatic power saving feature. Enabling ensures very
low power consumption. WMM Power Save is an improvement to the 802.11e amendment, adding
advanced power management functionality to WMM. Options are Enabled and Disabled. The default
is Enabled.
Beamforming Trans-
mission (BFR)
Select to concentrate the transmission signal at the gateway location. This results in a better signal
and potentially better throughput. Options are Disabled, SU BFR, and MU BFR. The default is Dis-
abled.
Beamforming Reception
(BFE)
Select to concentrate the transmission signal at the gateway location. Options are Disabled, SU BFE,
and MU BFE. The default is Disabled.
Band Steering Select whether to detect if the client has the ability to use two bands. When enabled, the less-con-
gested 5GHz network is selected (by blocking the client's 2.4GHz network). Options are Disabled and
Enabled. The default is Disabled.
Enable Traffic Scheduler Select whether to enable scheduling of traffic to improve efficienty and increase usable bandwidth
for some types of packets by delaying other types. Options are Disable and Enable. The default is
Disable.
To Next Page
Loading...
