SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018 49
3. Select Bridging. Multicast source fields appear.
4. Modify the other fields as needed, using the information in the following table.
Field Name Description
Allow as IGMP Multicast
Source
Select to enable this service to act as an IGMP multicast source.
Allow as MLD Multicast
Source
Select to enable this service to act as an MLD multicast source.
Enter Service Descrip-
tion
(Optional) Enter a different name to describe this configuration.
Enter 802.1P Priority Options are 0 - 7. The default is -1 (disabled).
For tagged service, enter values in this field and the 802.1Q VLAN ID field.
For untagged service, accept the default of -1 (disabled) in this field and in the 802.1Q VLAN
ID field.
Enter 802.1Q VLAN ID Options are 0 - 4094. The default is -1 (disabled).
For tagged service, enter values in this field and the 802.1P Priority field.
For untagged service, accept the default of -1 (disabled) in this field and in the 802.1P Pri-
ority field.
To Next Page
Loading...
