Sonifex S2 - Page 101

S2 User Handbook
89
S2-CSMM STEREO MIX MINUS CHANNEL WITH EQ
S2-CSMM STEREO MIX MINUS
CHANNEL WITH EQ
12
General Purpose I/O Function Options
GPIO Function
ON Button
Cue/PFL
Button
AUD
Button
Input/Output
Latching/
Momentary
Active Low/
Active High
I L AL OFF OFF OFF
I M AL ON OFF OFF
I L AH OFF ON OFF
I M AH ON ON OFF
O L AL OFF OFF ON
O M AL ON OFF ON
O L AH OFF ON ON
O M AH ON ON ON
t /PXTFMFDU(1*0TBDUJPOVTJOHUIF1(.CVUUPOBTCFGPSF
General Purpose I/O Action Options
The functions available are dependent on whether the remote is set as an input or an
output. The two tables below describe the dierent functions available.
Input Functions
GPIO
Action
Description ON
Button
Cue/
PFL
Button
AUD
Button
None - OFF OFF OFF
Channel
ON
The remote pin replicates the ON
button in the module. Activating this
control will turn the channel on or o.
ON OFF OFF
Talkback
Enable
The remote pin controls Talkback
enable to the C/F outputs.
OFF ON OFF
TBU
Indicator
The remote pin controls the indicators
within the ON button. When this control
is active, the ON button will be green.
When it is not active it will be red. The
ON button mode must be set to Mode 3
when this action is used.
ON ON OFF
Fader On
The remote pin controls the fader open
function. When active, the fader is fully
open.
OFF OFF ON
Output Functions
GPIO
Action
Description ON
Button
Cue/
PFL
Button
AUD
Button
None - OFF OFF OFF
Channel
ON
The remote pin goes active when the
channel is LIVE.
ON OFF OFF
Talkback
Enable
The remote pin goes active when
Talkback is enabled.
OFF ON OFF