Sonifex S2 - Channel Options, Jumper Settings and Presets

72
S2 User Handbook
Source Remotes Connector
This 25 pin D type plug provides remote start/stop outputs for all the sources, and has the
following connections;
Pin 1: Screen, chassis.
Pin 2: OS 1 Start.
Pin 3: OS 1 Start Common.
Pin 4: OS 2 Start.
Pin 5: OS 2 Start Common.
Pin 6: OS 3 Start.
Pin 7: OS 3 Start Common.
Pin 8: OS 4 Start.
Pin 9: OS 4 Start Common.
Pin 10: OS 5 Start.
Pin 11: OS 5 Start Common.
Pin 12: OS 6 Start.
Pin 13: OS 6 Start Common.
Pin 14: OS 1 Stop.
Pin 15: OS 1 Stop Common.
Pin 16: OS 2 Stop.
Pin 17: OS 2 Stop Common.
Pin 18: OS 3 Stop.
Pin 19: OS 3 Stop Common.
Pin 20: OS 4 Stop.
Pin 21: OS 4 Stop Common.
Pin 22: OS 5 Stop.
Pin 23: OS 5 Stop Common.
Pin 24: OS 6 Stop.
Pin 25: OS 6 Stop Common.
Channel Options, Jumper Settings and Presets
The 6 way stereo line source select with EQ channel can be congured in a number of
dierent ways depending on the jumper options set on the board. The on board processors
software is congured by jumpers J1 to J3. Other, customer specic, options can be
programmed into the software by special order. Special logic options will be identied by
having links LK4 and LK5 tted.
The standard options available are;
t &OBCMFPSEJTBCMF$VF1'-DBODFMGSPNGBEFS
t &OBCMFDPOUJOVPVTNPNFOUBSZTUBSUGSPN0/CVUUPO
t 4FMFDUNPNFOUBSZPSMBUDIFETUBSUGPSBMMJOQVUT
t 4FMFDUUJNFSPQUJPO
S2-C6SS 6 WAY STEREO LINE SOURCE SELECT CHANNEL WITH EQ
S2-C6SS 6 WAY STEREO LINE SOURCE
SELECT CHANNEL WITH EQ
10