Need help?Do you have a question about the Sonifex S2 and is the answer not in the manual?
Outlines terms for repair/replacement of defective goods.
Safety regulations for mains operated equipment, CE mark conformity.
Procedure for reporting equipment faults and providing necessary details.
Describes the modular format, digital/analogue inputs, and simultaneous outputs.
Lists key features like modular build, script space, digital/analogue I/O.
Recommended installation environment, avoiding heat, dust, moisture, or vibration.
Advice on avoiding strong sources of electromagnetic radiation to prevent audio degradation.
Provides the physical dimensions of the mixer for installation planning.
Recommendations for using quality cables and connections to avoid installation issues.
Provides schematic diagrams illustrating signal flow for various input channels.
Presents examples of module configuration for typical audio applications.
Step-by-step guide for safely removing and re-installing mixer channels.
Instructions for connecting multiple mixer chassis to form a split desk configuration.
Details the older 2U rack-mount power supply unit.
Safety warnings and operational guidelines for the power supply unit.
Information on specifying the correct mains lead type when ordering the mixer.
Describes the mono input channel with mic/line selection and EQ.
Details the dual mic input channel, similar to Mic/Line but with two mic inputs.
Covers stereo line input channels, with and without equalization.
Explains the dual digital stereo input channel with AES/EBU or S/PDIF options.
Describes the telco input channel for telephone hybrid connections.
Explains the stereo mix-minus channel for cleanfeed return with EQ.
Covers digital PGM output channels for stereo and mono signals.
Details digital AUD output channels for stereo and mono signals.
Describes the channel for monitoring sources in the control room.
Explains the channel for monitoring sources in the studio.
Lists the various types of meterbridge modules available for the system.
Provides detailed impedance specifications for all inputs and outputs.
Specifies the gain adjustment ranges for various input and output types.
Details the frequency response characteristics for mic and line inputs.
Lists the equivalent input noise (EIN) for mic and stereo inputs.
Details power ratings, dimensions, and weights of power supplies.
Lists weights and dimensions for different S2 mixer chassis configurations.
Definition of signal level reduction.
Description of the professional digital audio standard.
Definition of signal output for telephone callers.
Method for adjusting frequency bands.
Pre Fade Listen function for monitoring.
Definition of TELephone COmmunication.
To Next Page
General