Sonifex S2 - S2-MB1-5 Meterbridge Blanking Plates; S2-ML Meterbridge Loudspeaker Monitor Panel; Fig 20-2: Blanking Plate; Fig 20-3: Loudspeaker Monitor Panel

136
S2 User Handbook
S2-MB1-5 Meterbridge Blanking Plates
Fig 20-2 : Blanking Plate.
Meterbridge blanking plates are available in channel widths from 1 to 5 inclusive and are
used to ll areas in the meterbridge not occupied by active modules.
S2-ML Meterbridge Loudspeaker Monitor Panel
Fig 20-3 : Loudspeaker Monitor Panel.
The speaker is used for monitoring PFL and reverse talkback in the control room directly
from the mixer. Two control knobs are provided for adjusting the levels of the PFL and
Talkback signals from cut-o at 0 to unity gain at 10. The speaker is muted automatically
when the control room mute is active, to prevent feedback.
20
METERBRIDGE MODULES
METERBRIDGE MODULES