Sonifex S2 - Glossary; Attenuation; AES;EBU; Cleanfeed

S2 User Handbook
143
METERBRIDGE MODULES
METERBRIDGE MODULES
20
Fig 20-10a : S2-M6SS Panel.
S2-M6SS Meterbridge 6 Way Source Select Panel
The meterbridge source selector panel produces a stereo analogue audio output from 6
selectable stereo analogue sources, which can be connected to a stereo input channel
within the mixer or the EXT 1 and EXT 2 monitor inputs to provide up to 12 external monitor
inputs. There are 6 illuminated panel push buttons, which select and indicate the current
channel selection. The 6 stereo sources are connected on the rear of the panel via a 25 way
D-Type female (socket) connector, which uses exactly the same pin conguration as the
stereo audio source input connector on the S2-C6SS channel. The single stereo output is
provided on a 9 way D-type male (plug) and the pin congurations are shown below.
Audio Input Connector - 25 pin D-type female (socket)
Pin 1: Ground.
Pin 2: Input 1 left phase.
Pin 3: Input 1 right phase.
Pin 4: Input 2 left phase.
Pin 5: Input 2 right phase.
Pin 6: Input 3 left phase.
Pin 7: Input 3 right phase.
Pin 8: Input 4 left phase.
Pin 9: Input 4 right phase.
Pin 10: Input 5 left phase.
Pin 11: Input 5 right phase.
Pin 12: Input 6 left phase.
Pin 13: Input 6 right phase.
Pin 14: Input 1 left non-phase.
Pin 15: Input 1 right non-phase.
Pin 16: Input 2 left non-phase.