S2 User Handbook
91
S2-CSMM STEREO MIX MINUS CHANNEL WITH EQ
S2-CSMM STEREO MIX MINUS
CHANNEL WITH EQ
12
Cue/PFL
Mode 1 : Normal. Cue/PFL is selected as normal, with both a momentary or
latched operation.
Mode 2 : Latched. Cue/PFL is selected as normal, but will only work with a
latched operation.
Mode 3 : Momentary. Cue/PFL is selected as normal, but will only work with a
momentary operation.
Mode 4 : Normal with remotes. Cue/PFL is selected as normal, with both a momentary or
latched operation and will also activate the remotes if the channel is not live.
Mode 5 : Latched with remotes. Cue/PFL is selected as normal, but with only a latched
operation and will also activate the remotes if the channel is not live.
Mode 6 : Momentary with remotes. Cue/PFL is selected as normal, but with only a
momentary operation and will also activate the remotes if the channel is not live.
ON
Mode 1 : Normal.
Mode 2 : Operates as normal except the start function is activated from rst fader up and
on combination. Thereafter, subsequent lowering and raising of the fader does not activate
a start or stop. Stop is only generated when channel is turned o.
Mode 3 : The LEDs in the ON button are driven by the GPIO set to TBU indicator mode.
To Next Page
Loading...